1.815.758.6691
The Science Of Precision Coatings

ARMOLOY XADC

Wear

< 1.2 TWI per AMS 2438

Hardness

Up to 98Rc

Corrosion

Equivalent to 440 SS

Lubricity

As low as .12 CoF

Galling

Eliminate cold welding

Adhesion

Atomic, absolute

Appearance

Silver Satin

Deposit

.00005” to .0006”

DIAMONDS ARE FOREVER

Introduced at Armoloy of Illinois by the Armoloy Corporation in 1997, XADC® established a premium upgrade to the Armoloy TDC® coating with the addition of a synthetic diamond composite to the Armoloy TDC bath.

Like natural diamond, the co-deposited nano diamonds are excellent thermal conductors promoting lower running temperatures in high heat applications.  Tests have shown XADC® coated parts to run nearly 20% cooler than parts coated with traditional Armoloy TDC®, further enhancing its wear properties.

With exceptional hardness and wear resistance, XADC® can be applied to nearly every common manufacturing steel in precision deposits as low as .000050″. Running an XADC®-coated part against an XADC®-coated part can result in coefficients of friction as low as .09, reducing wear, galling, and the need for excessive lubrication.

XADC® bonds absolutely with the base metal it is applied to, and will not chip, peel, or flake from this substrate. Highly corrosion resistant as well, XADC® rivals 440C stainless steel in its ability to withstand oxidation.

Though XADC® is an excellent candidate for all high-wear applications, it is especially well-suited to the Plastic Injection Molding industry, particularly where high-glass-fill resins are being formed.

COATING COMPARISON TABLE


Adhesion
Hardness
Wear
Lubricity
Corrosion Resistance
Release Properties
Uniformity
Standard Appearance
Base Metal
Deposit
Processing Temperature
Max Working Temp
Thermal Expansion
Magnetic Tendency
ARMOLOY TDC
Silver Satin
All Except:
AL, Mg, Ti
.00005" - .0006"
< 160°F
1600°F
2.7 – 4.6 (10¯⁶/°F)
Non-Magnetic
XADC
Silver Satin
All Except:
AL, Mg, Ti
.00005" - .0006"
< 160°F
1600°F
2.7 – 4.6 (10¯⁶/°F)
Non-Magnetic
BI-PROTEC
Silver Satin
All Except:
AL, Mg, Ti
.0035" Max
< 190°F
800°F

Non-Magnetic
NYFLON
Smoky Satin
All
.0002" - .0006"
< 200°F
400°F
13 x 10-6/°C
Non-Magnetic
EN (Mid Phos)
Bright
All
.003" Max
< 190°F
800°F
13 x 10-6/°C
Non-Magnetic
NICKELIZING
Bright
All
.003" Max
< 190°F
800°F
13 x 10-6/°C
Non-Magnetic

APPLICATION SPECIALTIES

Plastic Injection Molding

Through precise, engineered deposits, Armoloy TDC, XADC, and Nyflon 25 add incredible value to plastic injection molding applications, as well as those in the areas of extrusion and thermoforming... Read More

Machined Components

From fundamental components such as shafts, gears, and bearings, to the more complex components found in automated lines, packaging machines, and specialized machinery of every type, Armoloy Southeast can... Read More

Automation + Linear Motion

For over 20 years, Armoloy TDC has been the premier coating for the Linear Motion industry. The Armoloy TDC coating lowers the coefficient of friction of bearing steels, for smoother movement over rolling surfaces... Read More

Pumps And Compressors

For protection against the most common forms of wear including corrosive, abrasive, and erosive wear, consider coating your critical pump, valve and compressor surfaces with a protective Armoloy coating... Read More

Food Processing And Packaging

Apply Armoloy TDC and XADC to food-processing and food-packaging equipment and components for the most beneficial combination of wear resistance and corrosion resistance. The Armoloy coatings... Read More

Oil And Gas Extraction

In the field of oil and gas drilling and extraction, the Armoloy coatings are ideally suited for components operating in corrosive downhole environments. The coatings’ high corrosion and wear resistance... Read More

Aerospace

Armoloy TDC is an optimal metal surface coating for aerospace components that require improved wear and corrosion resistance, vast functional temperature range, and consistent, even deposits... Read More

Medical

Armoloy TDC and Electrolizing are precise, biocompatible, pure, metallic chromium coating for medical, surgical, laboratory and clean room environments. Highly trained coating professionals and strict... Read More

Nuclear

For over 30 years the Armoloy TDC coating has been applied to variety of nuclear industry devices including fuel cell and reactor core components. The improved wear and corrosion resistance of... Read More

The Armoloy family of coatings are specifically designed to keep machinery and equipment running longer. For increased wear life, reduced friction, protection from corrosion and galling, and many other benefits, Armoloy of Illinois provides a full range of metallic surface coatings to the manufacturing community. High precision is our specialty.

Armoloy provides industry-leading protective metallic coatings that benefit various industries, including food processing/packaging, oil/gas extraction, Aerospace, medical, and nuclear industries, to name a few. Metal surface treatments tailored to these applications must withstand extremely harsh conditions and provide added durability capable of extending the life of components and systems. Our experienced staff can help engineer the right metal finishing solution to your application.

Our proprietary metal surface treatments are fully compliant with the industry's most rigorous requirements and certifications. At less than 170ᵒF, the Armoloy metal finish process is considered a "cold process" that will not distort or anneal coated parts. The Armoloy coatings form a hard protective metallic surface with an absolute bond to the base metal that will not affect part tolerances or balance. This thin, precision coating will improve surface hardness and lubricity while dramatically increasing your coated parts' wear life. Our stringent quality requirements and onsite product testing will ensure your parts meet strict industry standards.

Armoloy offers a variety of coating solutions engineered to solve your coating needs. The Armoloy TDC/XADC coating will not flake, chip or peel from your base material ensuring a safe coating process that is food and medical application safe. Your maintenance and machinery expenses will lessen thanks to the coating's increased wear resistance leading to decreased downtime and replacement costs. Don't settle for traditional metallic plating shortcomings when you can have the Armoloy family of coatings protecting your valuable automated systems and components.